Automatic switch-off (tuner mode), The ’demo’ function – Philips VR700/58 User Manual

Page 27

Automatic switch-off (tuner mode)

If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver (tuner).

Switch on the TV set and select the programme number
for the video recorder.

Press the

button. The main menu appears.

Select the line ’SPECIAL SETTINGS’ with the

P =

P ;

button and confirm with the menu button

Select the line ’AUTO STANDBY’ with the

P =

P ;

button.

Select ’OFF’ with the

button. If you select

’ON’, the function will be switched on.

Confirm with the

button.

To end, press the

button.

D A TIMER recording only works when the video

recorder is switched to standby.

The ’DEMO’ function

When the ’DEMO’ function is switched on and the video
recorder switched off, several menus will be demonstrated on
the TV screen. This has no influence on operating the video
recorder.

Switch on the TV set and select the programme number
for the video recorder.

Press the

button. The main menu appears.

Select the line ’SPECIAL SETTINGS’ with the

P =

P ;

button and confirm with the

button.

In the line ’DEMO’, select ’ON’ with the

button.

If you select ’OFF’ the function will be switched off.

Confirm with the

button.

To end, press the

button.

D The ’DEMO’ function is not possible during a ’TIMER

recording’ and during an ’Automatic recording from
a satellite receiver’.