Philips VR700/58 - Manual (Page 3)

Front of the set
STANDBY m Standby : To switch off, interrupt function, interrupt TIMER recording
MANUAL Manual sound control : To switch between automatic sound control and manual sound
control
PROGRAMME ; Programme number Plus: Programme number up
PROGRAMME = Programme number Minus: Programme number down
RECORD n Record: To record the programme selected at this moment
EJECT J Eject: To eject a cassette
STOP h Pause/Stop: To stop the tape, except during TIMER-recording
PLAY G Playback : To play back a recorded cassette
o Rotary control: turn left: during STOP and STANDBY: rewind, during PLAYBACK: reverse
scanning
turn right: during STOP and STANDBY: wind, during PLAYBACK: forward scanning
STILL R Still picture: To stop the tape and display the actual position on the tape as a still picture
Sockets at the lefthand corner on the front:
White and red socket: Audio input socket left/right : To connect a camera recorder or
video recorder (programme number ’
E3
’)
Yellow socket: Video input socket : To connect a camera recorder or video recorder
(programme number ’
E3
’)
Back of the set
4 Mains socket: To connect the mains cable
AUX IN L R Audio input socket, left/right : To connect a HiFi-set (programme number ’
AUX
’)
AUX OUT L R Audio output socket, left/right : To connect a HiFi-set
EXT.2 AV 2 Scart socket 2: To connect a satellite receiver, decoder, video recorder, etc. (programme
number ’
E2
’)
EXT.1 AV 1 Scart socket 1: To connect the TV set (programme number ’
E1
’)
2 Aerial input socket: To connect the aerial cable
3 Aerial output socket: To connect the TV set
&