Powerware Uninterruptible Power Supply SOLA 4000 - Manual (Page 47)

SOLA 4000 - Installation and Initial Start-Up
JUE 401265 47
External Battery (65 Ah) Installation 65 Ah external batteries are installed in a B3/65 battery cabinet. To
assemble the battery cabinet:
• Remove the battery switch IB and the terminals.
• Insert the battery blocks from the front and rear sides.
Warning: after assembly there is a voltage of 192 V at the front
and rear side.
• Remount the battery switch IB and the terminals.
Important: Open battery switch IB before connecting the cables.
• Connect the battery blocks on the various levels to the battery
switch IB, and IB to the terminals, as shown in FIG. 1.12.8 and
FIG. 1.12.9
FIG. 1.12.7 Battery cabinet B3/65
FIG. 1.12.8 B3/65: switch IB and terminals
1 Installation