Patton electronic RocketLink 3202 - Manual (Page 88)

Show Command Menu 88
Model 3202 Getting Started Guide 5 • Console and Telnet configuration
Show Command Menu
The show command menu lists commands for viewing system and configuration information for the Model
3202. Move the cursor “ >>” to show in the main menu and press Enter.
When you enter the show command, the following menu displays:
Move the cursor “ >>” to system in the show menu and press Enter.
Figure 56. System Information
Write Command
The write command saves all new configuration changes to Flash on the Model 3202. You must use the write
command and reboot the modem for new configuration changes to tak effect. Move the cursor “ >>” to write
in the main menu and press Enter.
----------------------------------------------------------------------
Command: write
Message: Please input the following information.
Are you sure? (y/n): y
----------------------------------------------------------------------
>> system Show general information
config Show all configuration
script Show all configuration in command script
Table 34. Show Command Menu
Command Description
system Displays general system information
config Displays detailed configuration information
script Displays configuration information in command script