Patton electronic RocketLink 3202 - Manual (Page 61)

Administration Options 61
Model 3202 Getting Started Guide 4 • Web configuration
Community Pool
An SNMP community is a group of devices and management stations running SNMP. It helps define where
information is sent. The community name is used to identify the group. A SNMP device or agent may belong
to more than one community. It will not request information from management stations that do not belong to
one of its communities.
Click Modify to set up community pools.
Figure 41. SNMP community pool configuration
In the table of the current community pool, you can set up access:
• Status: Enable–Turn on the SNMP function; Disable–Turn off the SNMP function
• Access Right: Deny–Restrict all access; Read–Read-only access; Write–Read/write access
• Community: The password for write access.
After configuring the community pool, click Finish. The browser will prompt the configured parameters and
check it before writing into NVRAM. Press Restart to reboot the Model 3202 with the new settings. Click
Continue to configure other options.
Table 14. Default SNMP Communities
Access Right Community
Read public
Write private