Maintenance and lubrication, Storage – Polaris 500 2X4 User Manual
Page 99
96
MAINTENANCE AND LUBRICATION
Storage
If your vehicle is to be placed in extended or off season storage, the
following steps should be taken to preserve its condition.
1. Perform all necessary repairs and thoroughly clean the vehicle.
2. Remove the spark plug and pour approximately one ounce of
Premium 4 oil into the cylinder. Operate the starter for a few
seconds and reinstall the spark plug.
3. Remove the battery. Store it in a cool, dry place out of the sun.
4. Lubricate suspension pivot points, lower steering post and rear axle
fittings.
5. Drain the engine side cover (4X4).
6. Block the vehicle so all tires are suspended off the ground.
7. Spray oil on all unpainted metal surfaces to prevent rusting. Avoid
getting oil on rubber parts or in the brakes.
8. Lubricate all cables.
9. Tie a plastic bag over the exhaust pipe and air cleaner inlet to
prevent moisture or small animals from entering.
10. Cover the vehicle with a canvas cover. Do not use plastic or coated
materials since they do not allow ventilation for the vehicle.