Polaris 500 2X4 - Manual (Page 32)

H
L
N
R
H
N
R
29
FEATURES AND CONTROLS
Gear Selector (1)
RANGER 2X4, 4X4
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
RANGER TM
H: High Gear
N: Neutral
R: Reverse
NOTE: Low is the primary driving range for the
RANGER 2X4 and 4X4. High is intended
for use on hard-packed surfaces with light
loads.
To change gears, stop the vehicle and with the engine idling, move the
lever to the desired gear. Do not attempt to shift gears with engine
speed above idle or while the vehicle is moving.
Always place the transmission in gear with the parking brake locked
whenever the vehicle is left unattended.
Maintaining shift linkage adjustment is important to assure proper
transmission function. See your dealer if you experience any shifting
problems.
CAUTION
Do not attempt to shift the transmission while the vehicle is
moving or damage to the transmission could result. Always shift
when the vehicle is stationary and the engine is at idle.
Always place the transmission in gear with the parking brake
applied and turn the vehicle off whenever the vehicle is left
unattended.
1