Polaris 500 2X4 - Manual (Page 77)

1
74
MAINTENANCE AND LUBRICATION
Cooling System (2X4, 4X4)
Radiator Coolant Level
Always check and change the coolant at the intervals outlined in the
Periodic Maintenance Chart beginning on page 53.
WARNING
Escaping steam can cause severe burns. Never remove the
pressure cap while the engine is warm or hot. Always allow the
engine to cool before removing the pressure cap.
1. Lift the hood and slowly
remove the radiator cap (1).
2. View the coolant level through
the opening.
3. Use a funnel and slowly add
coolant as needed.
NOTE: This procedure is
required only if the
cooling system has been
drained for maintenance
and/or repair. But if the
overflow bottle has run
dry, the level in the
radiator should also be
inspected.
NOTE: Use of a non-standard pressure cap will not allow the
recovery system to function properly. See your dealer for
the correct replacement part.