Paradyne 3162 - Manual (Page 8)

6
Table 2. DTE Interface Configuration Options
Option Factory 1 Factory 2 Comments/Description
Interface Status:
Enable Enable
Enables the use of the DTE
Interface Status:
Disable Disable
Enables the use of the DTE
Drop/Insert port.
Line Framing
D4 D4
Selects D4 or ESF framing format
Line Framing
Format:
ESF ESF
Selects D4 or ESF framing format.
Line Coding Format:
AMI AMI
Selects AMI or B8ZS line coding
Line Coding Format:
B8ZS B8ZS
Selects AMI or B8ZS line coding
format.
0–133 0–133
133–266 133–266
Line Equalization:
266–399 266–399
Provides selectable extended DTE
range capability.
399–533 399–533
range capability.
533–655 533–655
DTE LB on External
Contact: Enable Enable
Allows control of DLB on external
Contact:
Disable Disable
Allows control of DLB on external
contact closure.
Send All Ones on
Enable Enable Sends all ones on channels
allocated to the network T1 on
Send All Ones on
DTE Failure:
Disable Disable
allocated to the network T1 on
LOS, LOF, or AIS.
Line 1 Displays: Line 2 Displays: Meaning Comments/Description
DTE Signaling
D01 D02
D24:
RBS
Voice
Channel
Specifies which channels from the
DTE Drop/Insert interface are
voice channels and should pass
g g
D01 D02... D24:
None Data Channel
p
voice channels and should pass
RBS information to the network.