Paradyne 3162 - Manual (Page 17)

15
Table 12. Management and Communication – Communication Protocol
Configuration Options
Option Factory 1 Factory 2 Comments/Description
Node IP Adr:
[Text Field] [Text Field]
The IP address needed to access
Node IP Adr:
Clear Clear
The IP address needed to access
the DSU/CSU.
Node Subnet Mask:
[Text Field] [Text Field]
The Subnet Mask needed to
Node Subnet Mask:
Clear Clear
The Subnet Mask needed to
access the device.
None None
Com Com
Default Network
Destination:
Aux Aux
Specifies the default network
destination.
Destination:
FDL FDL
destination.
EDL n EDL n
Communications
[Text Field] [Text Field] The IP address for the COM port
when the Port Use configuration
Communications
Port IP Address:
Clear Clear
p
when the Port Use configuration
option is set to Mgmt or Daisy.
Communication Port
[Text Field] [Text Field]
The Subnet Mask needed to
access the device when the Port
Communication Port
Subnet Mask:
Clear Clear
access the device when the Port
Use configuration option is set to
Mgmt or Daisy.
Com Link Protocol:
PPP PPP
The link layer protocol for the COM
port when the Port Use
Com Link Protocol:
SLIP SLIP
port when the Port Use
configuration option is set to Mgmt
or Daisy.
Auxiliary Port
[Text Field] [Text Field]
Specifies the alternate modem
Subnet Mask needed to access the
device when the Port Use
Auxiliary Port
IP Address:
Clear Clear
device when the Port Use
configuration option is set to Mgmt
or Daisy.
Auxiliary Port
[Text Field] [Text Field]
Specifies the Subnet Mask needed
to access the device when the Port
Auxiliary Port
Subnet Mask:
Clear Clear
to access the device when the Port
Use configuration option is set to
Mgmt or Daisy.