Paradyne 3162 - Manual (Page 14)

12
Table 8. User Interface – External Device Configuration Options
Option Factory 1 Factory 2 Comments/Description
E t l D i
Disable Disable Controls whether no commands,
AT
d External Device
Commands:
AT AT
Controls whether no commands,
AT commands, or
user-configurable commands are
Commands:
Other Other
user-configurable commands are
sent out the COM port.
Dial-In Access:
Enable Enable Controls whether dial-in access is
allowed from the external device
Dial-In Access:
Disable Disable
allowed from the external device
connected to the COM port.
Connect Prefix:
[Text Field] [Text Field] Allows you to enter up to
20 characters to be used with the
Connect Prefix:
Clear Clear
20 characters to be used with the
dial directory phone number.
Connect Indication
[Text Field] [Text Field]
Allows you to enter up to
20 characters used to determine
Connect Indication
String:
Clear Clear
20 characters used to determine
whether a connection has been
established.
Escape Sequence:
[Text Field] [Text Field] Allows you to enter up to
20 characters to identify the COM
Escape Sequence:
Clear Clear
20 characters to identify the COM
port’s escape sequence.
None None
0.2 0.2
Escape Sequence
0.4 0.4 Specifies the delay in seconds
required before and after the
Escape Sequence
Delay (sec):
0.6 0.6
required before and after the
user-defined escape sequence.
0.8 0.8
user defined escape sequence.
1.0 1.0
Disconnect String:
[Text Field] [Text Field] Allows you to enter up to
20 characters to be used as the
Disconnect String:
Clear Clear
20 characters to be used as the
COM port’s disconnect string.