Paradyne 3162 - Manual (Page 12)

10
Table 6. General Configuration Options
Option Factory 1 Factory 2 Comments/Description
Generate Yellow
Enable Enable
Yellow alarm is generated by the Generate Yellow
Alarm Signals:
Disable Disable
Yellow alarm is generated by the
DSU/CSU on LOS, LOF, or AIS.
Self-Test:
Enable Enable
Allows bypass of self-test on
Self-Test:
Disable Disable
Allows bypass of self-test on
initialization.
Test Timeout:
Enable Enable Specifies whether the durations of
user initiated tests are limited by
Test Timeout:
Disable Disable
p
user-initiated tests are limited by
Tst Duration.
10 10
Test Duration:
Up Up Specifies the duration of
i iti t d l b k d tt
Test Duration:
Down Down
Specifies the duration of
user-initiated loopback and pattern
tests.
Save Save
es s
Network Network
DTE DTE
Selects the clock source to be
Primary Clock
Source:
Internal Internal
Selects the clock source to be
used as the master clock for the
DSU/CSU
Source:
External External
used as the master clock for the
DSU/CSU.
Port 1 Port 1
2048 2048
External Clock Rate: 1544 1544
Selects the clock rate of the source
if external.
External Clock Rate:
8 8
if external.
Table 7. User Interface – Communication Port Configuration Options (1 of 2)
Option Factory 1 Factory 2 Comments/Description
Mgmt Mgmt
Port Use:
ASCII ASCII
Controls how the COM port is
Port Use:
Daisy Daisy
Controls how the COM port is
used.
Terminal Terminal
Port Type:
Asynchronous Asynchronous
Controls whether the COM port is
Port Type:
Synchronous Synchronous
Controls whether the COM port is
synchronous or asynchronous.
Clock Source:
Internal Internal
Controls whether the COM port
Clock Source:
External External
Controls whether the COM port
uses an internal or external clock.