Paradyne 3162 - Manual (Page 13)

11
Table 7. User Interface – Communication Port Configuration Options (2 of 2)
Option Comments/Description Factory 2 Factory 1
1.2 1.2
2.4 2.4
4.8 4.8
Data Rate:
9.6 9.6
Selects the bit rate for the COM
port.
14.4 14.4
port.
19.2 19.2
38.4 38.4
Character Length:
7 7
Selects the character length for the
Character Length:
8 8
Selects the character length for the
COM port.
None None
Parity:
Even Even Selects the parity for the COM port.
Odd Odd
p y p
1 1
Stop Bits:
1.5 1.5
Selects the number of stop bits for
the COM port.
2 2
the COM port.
Ignore Control
Disable Disable
Specifies whether the COM port Ignore Control
Leads:
DTR DTR
Specifies whether the COM port
ignores DTR.
Password Required:
Enable Enable
Controls whether a password is
Password Required:
Disable Disable
Controls whether a password is
required during a call setup.
Inactivity Timeout:
Enable Enable Specifies whether the
communication port disconnects
Inactivity Timeout:
Disable Disable
p
communication port disconnects
after a certain period of inactivity.
5 5
Disconnect Time:
Up Up
Specifies the period of inactivity
(1 to 60 minutes) that causes a
Disconnect Time:
Down Down
(1 to 60 minutes) that causes a
disconnect if Inactivity Timeout is
enabled.
Save Save
enabled.