Panasonic KW-WP1050E User Manual
Page 56
Getting Started
56
Helpline Tel. No.: U.K. 0844 844 3898
Setting
Description
[Connection Mode]
L
Select [AP-DHCP] for Connection Mode if the DHCP server
is operating in the router or modem with a built-in router you
are using. Select [AP-Static] if you want to assign Static IP
address.
[IP Address]
For [AP-Static]:
L
Enter the IP address and subnet mask corresponding to
your local network.
L
Set 4 numbers (0 – 255) separated by periods such as
“192.168.102.253”.
Note:
L
There are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.
[Subnet Mask]
[Default Gateway]
For [AP-Static]:
L
Enter the default gateway address corresponding to your
local network by entering the IP address of your existing
router or modem with a built-in router, for example.
L
Set 4 numbers (0 – 255) separated by periods such as
“192.168.102.253”.
Note:
L
There are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.
WP1050E.book Page 56 Thursday, March 29, 2007 11:31 AM