Panasonic KW-WP1050E - Manual (Page 172)

Base Unit Settings
172 Helpline Tel. No.: U.K. 0844 844 3898
3
Configure the settings, then click [Save].
4
Click [Restart].
L
The base unit automatically restarts and the Top Menu is displayed.
Note:
L You need to register the handset to the base unit again when you change the network
name (SSID). See “Registering the handset” on page 136.
Setting Description
[Mode]
L
Select your wireless network mode from the pull-down menu.
L
If you have both 802.11b and 802.11g wireless devices in
your network, select [802.11b/g].
L
If you have only 802.11b wireless devices, select [802.11b]
[Channel]
L
Select [Auto] or the desired channel from 1 to 11.
[Network Name
(SSID)]
L
Enter your wireless network name (SSID) (1 – 32
alphanumeric characters) in this data field.
[SSID Broadcast] L Enable or disable the setting to broadcast your SSID.
L If you select [Disable], only wireless devices that know the
SSID of the base unit can connect to the base unit.
L
If you select [Enable], any wireless device can detect the
SSID of the base unit.
WP1050E.book Page 172 Thursday, March 29, 2007 11:31 AM