Panasonic KW-WP1050E - Manual (Page 160)

Base Unit Settings
160 Helpline Tel. No.: U.K. 0844 844 3898
4
Configure the settings under the Port Forwarding Setting heading. Click [Add] to add
a new entry.
5
Click [Restart].
L
The base unit automatically restarts and the Top Menu is displayed.
Note:
L
To edit the setting:
1
Click the desired entry number in step 3.
2
Edit the items in the Port Forwarding Setting page.
3
Click [Save].
4
Click [Restart].
L
To delete the setting:
1
Click the desired entry number in step 3.
2
Click [Delete] in the Port Forwarding Setting page.
3
Click [OK] in the confirmation dialogue box.
4
Click [Restart].
Setting Description
[No.]
L
Select the desired entry number for the port forwarding
setting.
L
Entry number represents the priority. Entry number 1 has the
highest priority.
[Status/Port
Forwarding] L Select whether to enable or disable the port forwarding
feature.
[Forwarding IP
Address]
L
Enter the IP address of the computer that is hosting the
service.
L The device registered as the forwarding IP address can be
accessed from the Internet through the registered protocol
and port.
[Protocol]
L
Select the desired protocol used to access your hosting
service from TCP/UDP/TCP&UDP/ESP/GRE.
[Port]
L
Enter the forwarding port number when you select the
protocol from TCP/UDP/TCP&UDP.
L
If you want to set one port, enter its port number only.
L If you want to set a range of ports, enter the port numbers in
the following way: “2000 – 3000”
WP1050E.book Page 160 Thursday, March 29, 2007 11:31 AM