Panasonic KW-WP1050E - Manual (Page 113)

Handset Wireless Network Connection and Settings
Helpline Tel. No.: U.K. 0844 844 3898 113
To connect to a wireless network that is not found in range:
Some networks do not broadcast their network name (SSID), and you can not find these
networks in range. When you want to connect to such a network, you need to enter its
network name (SSID) and network key.
1
While in the Idle mode, press {Options}.
2
“
View networks
” i {Select}
3
{
Options}
4
“
Add manually
” i {Select}
5
Enter the network name (SSID) i {OK}
6
“
Network security
” i {Select}
7
Select the security type i {Select}
8
Enter the network key i {Select}
For WEP security network:
L Enter the network key containing 5 alphanumeric or 10 hexadecimal characters for
WEP 64bit or 13 alphanumeric or 26 hexadecimal characters for WEP 128bit.
For WPA-PSK(TKIP) or WPA2-PSK(AES) security network:
L
Enter the network key containing between 8 and 63 alphanumeric characters or 64
hexadecimal characters, then skip to 10.
9
Select the key index. i {Select}
L Most of wireless networks use key index 1.
10
{
Back}
L
The handset attempts to connect the network. After a network connection is
completed, you are required to sign in to Skype if you have not signed in yet.
L If failed, error message is displayed, then press {OK} and go back to step 3.
Note:
L
In step 5, after {OK}, “
Saved
” message is displayed. Press {OK} or leave the display
for 3 seconds.
L
In step 6 to 9, you can set other settings, such as TCP IP and Advanced settings.
WP1050E.book Page 113 Thursday, March 29, 2007 11:31 AM