PYLE Audio DVDR5520H - Manual (Page 97)

English
97
Why does it take so long to display the
contents on my USB device?
– This could be due to the large numbers
of fi les (>500 fi les/folders) or size of the
fi les (>1MB).
– There could be other non-supported fi les
in the device that this unit is trying to
read/display.
What if unsupported devices (e.g. USB
mouse, keyboards) are plugged into
the unit?
The device may cause this unit to be
unstable. Remove the unsupported device
and unplug the mains cord. Wait for a few
minutes before reconnecting the mains cord
and power on this unit again.
What happens when I plug in a USB
HDD?
HDD is not supported as the large storage
capacity makes navigation very diffi cult.
Transfer the music fi les (mp3) and photos
(jpg) into a fl ash drive if you want to
playback on this recorder.
Why does this unit fail to detect my
USB portable music player?
The portable music player may require
propriety software that is bundled with our
system in order to access the contents (eg.
playlist).
What types of fi le does the system
support?
We support only FAT16 and FAT32, not
NTFS.
Why does the fi le name appear to be
different from what was displayed on my
computer (e.g. from ‘Good Bye. jpg’ to
‘Good_B~1.jpg’)?
– The length of the fi le name is restricted
by the fi le system of the device (FAT16),
which only supports eight (8) characters.
– The computer may be able to display the
full fi le name as the operating system can
convert the fi le system.
Why can’t I rotate the pictures in my
device?
In order to rotate the pictures in the USB
device, the picture must contain EXIF
information, stored by most digital cameras.
This EXIF information may have been
removed when you edit or copy the picture
from other devices using editing
programmes.
Why can’t this unit play some of my
music fi les, photos or movies?
The music fi les may not be playable because
of different formats and encoding bit-rates.
Similarly, the photos may be of low
resolution or too high resolution for this unit
to support.
When playing a DivX movie, why the
subtitle cannot be displayed properly?
– You have to make sure that the subtitle
fi le has the exact same fi le name as the
movie fi le. If for example the fi lename of
the movie is “Movie.avi”, then you will
need to name the text fi le “Movie.sub” or
“Movie.srt”.
– You may need to change the ‘Character
set’ or ‘DivX subtitle’ display of this
player to which supports the recorded
DivX subtitle.
Character set /
DivX Subtitle Subtitle language
Standard English, Irish, Danish,
Estonian, Finnish, French,
German, Italian, Portuguese,
Luxembourgish, Norwegian
(Bokmål and Nynorsk),
Spanish, Swedish, Turkish
Central
Europe Polish, Czech, Slovak,
Albanian, Hungarian,
Slovene, Croatian, Serbian
(Latin script), Romanian,
Cyrillic Belarusian, Bulgarian,
Ukrainian, Macedonian,
Russian, Serbian,
Greek Greek
Frequently Asked Questions
(continued)