PYLE Audio DVDR5520H - Manual (Page 27)

English
27
Step 3: Installation and Set-up
(continued)
Previous Start
Channel search
Full installation
Channel search installs Analogue
and Digital TV channels.
Antenna needs to be connected.
Only Analogue TV
Only Digital TV
No TV install
Note: Make sure you have successfully
made all the required connections to this
recorder, the TV and Satellite Receiver/
Cable Box (if any) and turned them on.
The channel search will detect the signals
and save all the available programme
channels.
If { No TV install } is selected, only
recordings from external sources will be
possible.
G After the channel search is fi nished, the
number of found and stored channels
appear. Press the Green button to
continue.
Cancel
Next Restart
Searching channels.
This may take a few minutes. Please wait.
Digital TV channels found: 3
Digital channel search
Digital TV channels found: 9
Digital Radio channels found: 3
Digital channel search completed
ChkSignal
H The Time entry screen appears. Use the
alphanumeric keypad 0-9 or
keys to enter the correct time, then
press OK to confi rm or the Green
button to continue.
Previous Next
Time setting is required for
making recordings. Time
format is 24h (hh:mm)
Time
00 00 :
I The Date entry screen appears. Use the
alphanumeric keypad 0-9 or
keys to enter the correct date, then
press OK to confi rm or the Green
button to continue.
Previous Next
Date setting is required to
make recordings. Please
make sure it is correct.
Date
31 01 2007
J The installation is now completed. Press
the Green button on the remote control
to close the screen.
You have successfully completed the installation
of your recorder.
System is now ready for use.
Previous Done
Installataion Complete
The DVD recorder is now ready for
use.