PYLE Audio DVDR5520H - Manual (Page 93)

English
93
Other Information
(continued)
5.1 multi-channel recording
Digital 5.1 multi-channel recording lets
you capture the original sound from
digital multi-channel sources such as the
Cable Box/Satellite Receiver, when you
record a video that produces the full
cinema sound experience (Dolby Digital,
DTS surround or DTS ES, Dolby Digital
EX).
Notes:
– 5.1 multi-channel recording is only
possible in HQ and SP recording mode.
– 5.1 multi-channel recording is only
possible through DTT broadcast or audio
signal received from Digital/Optical input
socket or EXT-2-TO VCR/SAT socket
on this recorder.
– 5.1 multi-channel recordings cannot be
played back on other players.
Preparation for 5.1 multi-channel
recording
A Connect your Cable Box/ Satellite
Receiver to this recorder’s EXT2-TO
VCR/SAT socket and COAXIAL
DIGITAL IN socket.
B Turn on the TV to the correct viewing
channel for the recorder.
C Press OPTIONS, then move to
{ Settings } and press OK.
D Move to { Audio } in the menu and press
OK.
Recording
Playback
Audio
Analogue tuner
Digital tuner
Audio output
Digital input
Sound mode
Night mode
Language
Video output
Setup
HDMI audio
E Move to { Digital input } > { On } in
the menu and press OK to confi rm.
F Press OK to confi rm and followed by
OPTIONS to exit the menu.
Start recording
A Press LIVE TV on the remote control.
B To record from the cable box/satellite
receiver, press LIVE TV repeatedly to
switch to analogue tuner mode followed
by P +/- repeatedly to select
{ EXT 2 }.
To record from the digital terrestrial
tuner, press LIVE TV repeatedly to
switch to digital tuner mode.
‘D’ with the channel number appears
on the top left corner on the TV.
C Press REC to start recording.