Step 1: basic recorder connections, Connecting the antenna cables, English 16 – PYLE Audio DVDR5520H User Manual
Page 16: Option 1
English
16
MAINS
HDMI
OUT
S-VIDEO
OUT
AUDIO
OUT
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
IN
CVBS-OUT
P
B
P
R
Y
R
L
TO VCR/SAT
EXT
2
TO TV
EXT
1
ANALOG
ANTENNA INPUT
TO TV ANTENNA
INPUT
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH
ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
G-LINK
Step 1: Basic Recorder Connections
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes.
This recorder has two types of tuner
input, one for digital TV reception and
one for analogue TV reception. If you
have a separate indoor digital terrestrial
antenna or you want to connect your
recorder to Cable TV as well as antenna,
follow option 2. Otherwise, follow
option 1.
Helpful Hints:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or cable box or VCR), you’ll
have to disconnect some of the cables before
you make the antenna connection.
– If you want to connect to a VCR and/or a
separate Cable Box/ Satellite Receiver, see
‘Step 2: Optional Connections’ for details.
Before you start ...
Select a suitable antenna connection.
Option 1: Connecting to a single
off-air antenna
Use this connection if you have only an
off-air antenna and wish to receive both
analogue and digital TV programmes.
A
Connect the existing Antenna cable (it
can be from the off-air wall socket or
Cable Box) to the DIGITAL
ANTENNA INPUT
socket on the
recorder.
B
Connect the Tuner interlink cable
(supplied) to the DIGITAL
ANTENNA LOOP THROUGH and
ANALOG ANTENNA INPUT
sockets on the recorder.
C
Connect a RF antenna cable (supplied)
from the TO TV ANTENNA INPUT
socket on the recorder to the
antenna input socket on your TV (usually
labelled as ANT, ANTENNA IN, RF IN).
Option 1