PYLE Audio DVDR5520H - Manual (Page 24)

English
24
Step 2: Optional Connections
(continued)
Connecting to an AV
amplifi er/receiver
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL OUT
socket on the recorder to the digital
coaxial input socket (or labelled as
COAXIAL IN or DIGITAL IN) of the
connected device.
Helpful Hint:
– You have to set the appropriate Digital
Audio Output setting. Otherwise, no sound or
interference may occur. See ‘System Menu
Options - Audio settings’ for details.
Connecting to digital input
for 5.1 multi-channel recording
This recorder is equipped with a digital
audio input socket that supports 5.1
multi-channel signal. The 5.1 multi-
channel surround output from the Cable
Box/Satellite Receiver can be recorded
onto this recorder, along with the video.
A Connect a scart cable from the EXT2-
TO VCR/SAT socket on the recorder
to the Scart socket (usually labelled as TV
OUT or TO TV) on the Cable Box/
Satellite Receiver.
B Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL IN
socket on the recorder to the DIGITAL
or COAXIAL output socket on the
connected Cable Box/ Satellite Receiver.
For more information, see chapter
‘Other information - 5.1 multi-channel
recording’.
HDMI
OUT
S-VIDEO
OUT
AUDIO
OUT
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
IN
CVBS-OUT
P B
P R
Y
R
L TO VCR/SAT EXT 2 TO TV EXT 1
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
AV amplifi er/
receiver
HDMI
OUT
S-VIDEO
OUT
AUDIO
OUT
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
IN
CVBS-OUT P B
P R
Y
R
L TO VCR/SAT EXT 2 V EXT 1
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
COAXIAL
DIGITAL OUT
B
A