PYLE Audio DVDR5520H - Manual (Page 84)

English
84
System Menu Options
(continued)
Audio settings (underlined options are the factory default settings)
This setting is only required if you are using the recorder’s
COAXIAL/OPTICAL OUT socket to connect other audio/video
device.
{ All }
– The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM only } – The connected device does not support
multi-channel formats. The recorder
converts multi-channel to PCM (Pulse Code
Modulation) format.
This setting is only required if you are using the recorder’s HDMI
OUT socket to connect your TV or other display device.
{ Auto }
– Auto selection of the best supported audio
output through the HDMI connection.
{ Disable } – Disable HDMI audio output. In this case, an
alternative audio connection is required
from the recorder to your TV.
Setting for digital audio input.
{ Off }
– Disable digital audio input. 5.1-channel
recording from the external source is not
possible.
{ On } – Enable digital audio input from the device
connected to EXT 2-TO VCR/SAT or
DIGITAL/OPTICAL input socket on this
recorder.
Audio output
HDMI audio
Digital input