PYLE Audio DVDR5520H - Manual (Page 89)

English
89
System Menu Options
(continued)
Digital Tuner settings
Press OK on the remote control to make a completely new
digital TV and radio install. This process may take several
minutes. Once complete, press BACK on the remote control
to exit.
Press OK to update new digital TV and radio installation.
This adds only the new channels to your existing preset list,
after the last free preset position. Once complete, press BACK
on the remote control to exit.
Note: New channels refer to the channels that are currently
not installed.
Press OK to display signal strength and quality information of
the digital tuner. It will help to fi nd the best position of your
digital terrestrial antenna.
Use keys to change the frequency and press OK to check
the signal strength and quality.
Change the order of the stored channels according to your
preference.
{ Digital TV }
– Set the preset order for digital TV channels.
{ Digital Radio } – Set the preset order for digital radio
channels.
1) Select the channel that you want to move and press B.
2) Move the selection bar to the preset number for which you
want to place the channel and press b or OK to confi rm.
Defi ne your favourite channels that can be quick accessed by
using the programme up/down button (P +-) on the remote
control.
{ Digital TV }
– Set list of favourite digital TV channels.
{ Digital Radio } – Set list of favourite digital radio channels.
X
– Mark (or unmarked) your favourite channels using the
OK button on the remote control.
Note: Unmarked channels can only be accessed by pressing
the corresponding number button on the remote control.
Full
Update
Check Signal
Sort channels
Favourites
Check the antenna connection and position.
Position the antenna to reach best signal quality.
Frequency
Signal strength
Signal quality
045.00
1 BBC
2 RTL4
3 ARD
4 ORF2
5
6 TELET