Panasonic KX-FC962HK - Manual (Page 6)

6
1. Installation and Quick Start
Cordless Handset 1.3 Battery installation /
replacement
1.3.1 Installing the batteries
1 Insert the batteries negative (T) terminal
first.
2 Close the battery cover.
1.3.2 Replacing the batteries
If 7 flashes even after the cordless handset
batteries have been charged for 7 hours, the
batteries must be replaced. We recommend the
use of Panasonic batteries. See page 5 for
accessory information.
Important:
L Use only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
L Do not mix old and new batteries.
1 Press the notch on the battery cover firmly
and slide it in the direction of the arrow.
2 Remove the old batteries positive (S)
terminal first and install the new ones. See
the battery installation procedure.
FC962HK-PFQX2283ZA-en.book Page 6 Thursday, September 15, 2005 4:20 PM