Panasonic KX-FC962HK - Manual (Page 55)

8. Answering Machine
55
Incoming Messages
8.2 Listening to recorded
messages
When the unit has recorded new voice
messages:
–
The {AUTO ANSWER} indicator will flash
when the auto answer setting is turned ON.
– The total number of recorded messages will
flash on the base unit display.
– the base unit beeps slowly if the message
alert feature (feature #42 on page 64) has
been turned on.
Example:
Press {PLAYBACK}.
L Only new messages will be played.
L Adjust the speaker volume using {A} or {B}.
L After playing back all of the new messages;
–
the {AUTO ANSWER} indicator will stop
flashing but will remain lit up when the
auto answer setting is turned ON.
– the total number of recorded messages
will stop flashing and remain displayed.
If you press {PLAYBACK} at this time, all
recorded messages will be played.
Note:
L The total recording time of all messages
(incoming and recorded conversation) is
about 15 minutes. A maximum of 50
messages can be recorded. If messages are
recorded in noisy environment, the actual
recording time may be less.
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the
beginning of the message, the previous
message will be played.
L To play back a specific message, press {<}
or {>} and search for the message you want
to listen to.
To skip a message
Press {>} to play the next message.
To stop playback
Press {STOP}.
8.2.1 Erasing recorded
messages
To erase a specific message
Press {ERASE} while listening to the message
you want to erase.
To erase all messages
1 Press {ERASE} while the unit is idle.
L To cancel erasing, press {STOP}.
2 Press {ERASE}.
02
{ PLAYBACK}
{A}{B}{<}{>}
{ ERASE}
{ STOP}
FC962HK-PFQX2283ZA-en.book Page 55 Thursday, September 15, 2005 4:20 PM