Panasonic KX-FC962HK - Manual (Page 48)

5. Fax
48
activation is turned ON beforehand (feature
#41 on page 64). The default setting is ON.
To stop receiving
Press {STOP}.
5.8.2 Activating TEL/FAX mode
1 Make sure feature #73 is set to “ TEL/FAX”
beforehand (page 65).
2 Press {AUTO ANSWER} repeatedly to
display the following.
TEL/FAX MODE
L The {AUTO ANSWER} indicator on the
base unit turns OFF and u disappears
from the cordless handset display.
3 The ringer volume setting should be ON
(page 19).
How phone calls and faxes are received
1. “ INCOMING CALL” will be displayed but the
unit will not ring.
2. The unit will wait for the duration of 2 rings
before answering the call.
L The number of rings is determined by the
“TEL/FAX delayed ring setting” (feature
#78 on page 66).
L During this time, an extension telephone
(if connected to the same line) will ring.
3. The unit will answer the call and try to detect
a fax calling tone.
When a fax calling tone is detected
The unit receives the fax automatically
without ringing.
When a fax calling tone is not detected
A The unit will ring. You may answer the call.
L Callers will hear a ring back tone different
from the one generated by the telephone
company.
L An extension telephone (if connected to
the same line) will not ring at this time. To
answer the call with the extension
telephone, lift the handset and press
{*}{
0} (default auto disconnection code)
while the fax machine is ringing.
B If you do not answer the call, the unit will
activate the fax function.
L Some fax machines do not generate fax
calling tones when sending faxes,
therefore the unit will try to receive a fax
even if no fax calling tone is detected.
Note:
L Even if you press the auto disconnection
code, the fax machine will activate the fax
function:
–
If the extension telephone is connected to
[EXT],
– Depending on the type of extension
telephone,
press {STOP} on the fax machine to talk with
the calling party.
FC962HK-PFQX2283ZA-en.book Page 48 Thursday, September 15, 2005 4:20 PM