Panasonic KX-FC962HK - Manual (Page 36)

4. Telephone
36
To stop viewing
Press {ih} after step 2.
4.9.2 With the base unit
The display will show the number of new calls in
standby mode.
Example: 10 CALLS
10:59 00
1 Press {CALLER ID}.
L The most recent call is displayed.
2 Press {B} to search from the recently
received caller information.
L If you press {A}, the display order will be
reversed.
3 Lift the handset or press {SP-PHONE} to
return the call.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
To change the way caller information is
displayed
Press {CALLER ID} repeatedly after the caller
information is displayed.
Example: SAM LEE
20 Jul 11:20 ,
b
1345678901
20 Jul 11:20 ,
L A Q on the display means the item has
already been viewed or answered, even if it
was viewed or answered using a cordless
handset.
Display while viewing
L When the unit could not receive a name, the
display will show “
NO NAME RCVD”.
L When no calls have been received, the
display will show “
MEMORY EMPTY”.
To stop viewing
Press {STOP}.
4.10 Editing a caller’s
telephone number before
calling back
4.10.1 With the cordless handset
1 Press {j/OK}.
2 Select “ Caller List”, then press {>}.
3 Press {e} or {v} repeatedly to display the
desired item.
4 To erase a number
Press {j/OK}, select “
Edit and Call”,
then press {>}.
Press {<} or {>} to place the cursor on the
number you wish to erase, then press {C/T}.
To add a number
Press the dial key ({0} to {9}).
L The number you pressed is added to the
top of the current number.
5 Press {C} or {s}.
4.10.2 With the base unit
1 Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {CALLER ID} repeatedly to display
the telephone number.
4 To erase a number
Press {*} to enter edit mode.
Press {<} or {>} to place the cursor on the
number you wish to erase, then press
{
STOP}.
To add a number
Press the dial key ({0} to {9}).
L The number you pressed is added to the
top of the current number.
5 Lift the handset or press {SP-PHONE} to call
back the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
Note:
L The edited telephone number will not be
saved as caller information. To store it into
the base unit phonebook, see page 38.
{ STOP}
{A}{B}
{ CALLER ID}
{ FAX/START}
{ SP-PHONE}
FC962HK-PFQX2283ZA-en.book Page 36 Thursday, September 15, 2005 4:20 PM