Panasonic DIGA DMR-EZ27 - Manual (Page 8)

8
RQT8851
Recording Television Programs
Refer to “Important Notes for Recording” ( ➔ 11) and “Advanced Recording” ( ➔ 12 to 15) for detailed information on
recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• RAM If the disc is protected, release protection ( ➔ 44).
to turn the unit on.
to select the DVD drive.
to open the tray
(Button located on front of the unit) .
Insert a disc with enough remaining blank space and press
[; OPEN/CLOSE] again to close the tray. –
to select desired channel.
Antenna Mode: Cable TV Mode:
To select with the numbered buttons ( ➔ 6).
When no channel setting is performed on the unit and broadcast is
recorded directly from the cable box or satellite receiver, select a
channel on the connected equipment and press [INPUT SELECT]
to select “IN1” or “IN2”.
–
–
to select the recording mode.
Recording mode ( ➔ 12) Remaining time
to start recording.
REC
Pausing Recording
Press [h PAUSE].
– Press again to restart recording.
Stopping Recording
Press [g STOP].
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 62 and 63.
•
Notes
-R -R DL -RW(V) +R +R DL +RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
•
•