Panasonic DIGA DMR-EZ27 - Manual (Page 18)

18
RQT8851
Slow-motion Play
RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
While paused
or
There are 5 slow-motion speeds. Each press
increases the speed.
Press [q PLAY] to restart normal playback. –
–
Notes
If continued for approx. 5 minutes, slow-motion play pauses
automatically (except
DVD-V ).
Frame-by-Frame Viewing
RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
While paused
Each press shows the next or previous frame.
Press and hold to advance or reverse frame-by-
frame in succession.
Press [q PLAY] to restart normal playback. –
–
–
Time Slip
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Use to skip in 1-minute or 10-minute increments.
During playback
e, r to select the time, then
Each press of e or r advances the interval
by 1 minute (press and hold for 10-minute
intervals). –
CM Skip
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Skips 1-minute forward with each press.
During playback
•
Create Chapters
RAM
During playback
Tips
You can skip to the start of a chapter by pressing [u, i].
Changing Audio during Playback
to select the audio.
Available audio will differ based on disc type.
See below.
RAM -RW(VR) and DivX
Stereo Mono L Mono R
e.g.: RAM
“Stereo” is
selected.
Play
Stereo
DVD-RAM
RAM -RW(VR) When playing an analog multilingual
broadcast, you can choose between Main Audio and
SAP Audio.
Main Audio
SAP Audio
DVD-V
This allows you to change items like the audio channel
number and the soundtrack language (
➔ 36).
Soundtrack 1 ENG Digital 3/2.1ch
e.g., English is the selected language.
Notes
If you cannot change the audio type when you have used only
an optical digital audio cable for connection, set “Dolby Digital” to
“PCM” (
➔ 39). Alternatively, you may connect to an amplifier or
system component with an audio cable and change the input on the
amplifier or system component to suit the connection (
➔ 52).
•
•
Advanced Playback