Panasonic DIGA DMR-EZ27 - Manual (Page 16)

16
RQT8851
Advanced Scheduled Recording
To cancel a scheduled recording in
progress
Confirmation screen appears. –
w to select “Stop recording”, then
Notes
Recording stops and the scheduled recording is deleted. (Daily
and weekly schedules remain and scheduled recording will start as
programmed.)
To release the unit from recording
standby
(Before recording starts)
The unit turns on and “z” on the unit’s display
goes out. –
Be sure to press [^ DVD POWER] to return the unit to standby
mode before the scheduled recording time. Scheduled recording
will work only if “z” is displayed.
Check, Change, or Delete Programs
The scheduled recording list can be viewed even when
the unit is off.
See “Tips” for explanation of icons displayed. –
e, r to select the program.
3a
or to delete.
You cannot delete programs that are currently
recording.
3b
to modify the program.
e, r, w, q to make changes,
then
–
•
•
“z” lights on the unit’s display. –
Notes
Recording may fail if there are changes to the station’s
programming.
The password screen appears when setting parental ratings (
➔42).
Unless you enter the correct password, recording the program with
parental ratings may fail.
Tips
You can enter up to 16 programs a month in advance.
Schedule List Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP DVD
Channel No Date On
New Scheduled Recording
Off Mode Check
A B
A Schedule List screen icons
* : Currently recording
W : Programs are overlapped. Recording of the program with
the later start time starts when the earlier program finishes
recording.
Q : You stopped a weekly or daily scheduled recording. The icon
disappears when the next scheduled recording starts.
F : The disc was full. (not enough space)
: The TV program may not be recorded due to copy-protect or
ratings.
X : Recording stopped (Dirty disc, etc.)
PG! : Recording may become impossible when a wrong password is
entered through the unit’s parental rating setting procedure.
B Check
OK: Recordable
➔ (Date): The last day of daily or weekly recording.
!: It may not be possible to record because:
the disc is write-protected.
there is no more space left.
the number of possible recordings has reached its
maximum.
Overlap: When the date and time overlap with another scheduled
recording, only a part of the program can be recorded.
•
•
•
–
–
–