Panasonic DIGA DMR-EZ27 - Manual (Page 54)

54
RQT8851
Setting the Channels and Clock
Preparation:
Turn on the television and select the appropriate video
input to suit the connections to this unit.
These are the first settings you make upon buying the
unit. You don’t need to make these settings again. •
•
to turn the unit on.
Language:
e, r to select, then
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Select Language
Seleccione el idioma
Sélection de langue
TV Aspect Ratio:
e, r to select “4:3 TV” or
“16:9 Widescreen TV”, then
Aspect Ratio Selection
Select TV type and press ENTER.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV 16:9
4:3
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”. •
•
Quick Start Function:
e, r to select “On” or “Off”,
then
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Automatic Clock and Channel
Settings:
e, r to select “Yes” or “No”,
then
When connecting the cable from the wall
(cable TV or antenna) to the unit’s RF IN:
Select “Yes”.
The unit then displays the source selection
screen (
➔ 55).
When not connecting the cable from the wall
(cable TV or antenna) to the unit’s RF IN:
Select “No”.
The unit then displays “Set Clock Manually”
screen (
➔ 55, Manual Clock Setting).
•
•
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit’s RF IN.
Yes
No
Continued on next page.
Tips
“Quick Start” function (➔ 38)
If you set Quick Start to on, you can start
recording to DVD-RAM about 1 second
after you press [^ DVD POWER] to turn
the unit on and then sequentially press
[* REC].
The following happens when you have
selected “On”.
Power consumption in standby mode
increases because power is supplied to
the unit.
To return to the previous screen
Press [RETURN].
•
–