Panasonic WJ-MP204C - Manual (Page 31)

31
STANDARD ACCESSORIES
Switch Protector ....................................................................... 1 pc.
ALL RESET
The Data Multiplex Unit WJ-MP204C can be reset to the default settings as follows:
1. Press the power switch to set it to the OFF position.
2. Press the power switch down to the ON position while pressing the camera selection buttons 2, 3, and 4.
3. Continue to press the camera selection button approximately 3 seconds after pressing the power switch down to the ON
position.
4. When all indicators light up, resetting is completed.
1
Press
2 3 4