Philips AVCHD HDC-TM20 - Manual (Page 71)

71
VQT2B30
If auto focusing is difficult due to the conditions,
then use manual focus.
≥ Press the MANUAL button. (
l 68)
1
(When MF assist function is used)
Select the menu. (l 27)
≥ This function’s default setting is [ON].
2
Touch [MF] icon.
≥ In manual focus mode, [AF] icon appears on
the screen.
3
Adjust the focus by touching /
.
The centre of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The centre of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ To return to auto focus, touch [AF] icon or
press the MANUAL button again.
≥ MF assist does not work if the zoom
magnification is more than 16k.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the
quality of the image.
≥ Press the MANUAL button. (
l 68)
1
Select the menu. (l 27)
2
Touch the desired setting items.
[SHARPNESS]:
Sharpness of the edge
[COLOUR]:
Depth of the colour of the image
[EXPOSURE]:
Brightness of the image
3
Touch / to adjust settings.
≥ After adjustments are made if no operations
are performed for about 2 seconds, the bar will
disappear.
4
Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to
complete the settings. appears on the
screen.
Manual focus adjustment
[RECORD SETUP] # [MF ASSIST] # [ON]
F IRIS SHTR WB MF
MF
MF
F IRIS SHTR WB MF
MF MF
MF
MF
AF
Picture adjustment
[RECORD SETUP] # [PICTURE ADJUST]
# [YES]