Philips AVCHD HDC-TM20 - Manual (Page 120)

120
VQT2B30
∫ If the driver has not been
recognised properly
Use the following methods to enable it to be
recognised.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
∫ To disconnect USB cable safely
1 Double click the ( ) icon in task
tray displayed on the PC.
≥ Depending on your PC’s settings, this icon
may not be displayed.
2 Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-SD20/SD USB
Device] is selected and click [OK].
Verify [MATSHITA HDC-TM20/SD USB
Device] or [MATSHITA HDC-TM20/MEM
USB Device] is selected and click [OK].
Verify [MATSHITA HDC-HS20/SD USB
Device] or [MATSHITA HDC-HS20/HDD
USB Device] is selected and click [OK].