Philips AVCHD HDC-TM20 - Manual (Page 119)

119
VQT2B30
With a PC
Setup
2
Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
≥ It is possible to use it connected to the PC with
the batteries only.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
The USB function selection screen will appear.
≥ Insert the USB connectors as far as they will
go.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4
Touch [PC].
≥ This unit is automatically recognised as an
external drive of the PC. (l 121)
≥ When the unit is connected to a PC its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
≥ Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon (
) appears on the unit screen.
≥
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or Built-in
memory access icon (
) appears on the unit
screen.
≥
Do not disconnect the USB cable or the AC
adaptor while the HDD access lamp is on or
HDD access icon (
) appears on the unit
screen.