Spot sequence setup spot sequence setup, Camera view setup camera view setup, Mode (mode) – Panasonic WJ-HD200 User Manual
Page 66: System information system information, Hdd hour meter (hdd hour meter), Hdd capacity (hdd capacity), System software version (system version), Mac address (mac address), Ip address (ip address), Subnet mask (subnet mask)
67
■
Spot Sequence Setup SPOT
SEQUENCE SETUP
8
Camera Channel (CAMERA CH)
1 - 8:
The selected camera image will be displayed.
OFF:
Blackout screen will be displayed.
8
Time (TIME)
Available duration:
2-30 S
■
Camera View Setup CAMERA
VIEW SETUP
8
Mode (MODE)
ON:
Live image of the channel is displayed.
OFF:
Blackout image is displayed.
Click the [SET] button if all are adequately set.
■
System Information SYSTEM
INFORMATION
8
HDD Hour Meter (HDD HOUR METER)
Each meter shows how many hours the digital hard disk
recorder has been operated in playback, recording and
idle. The built-in HDD needs replacement when the
hour meter reads around 30 000 H.
8
HDD Capacity (HDD CAPACITY)
The total usable capacity of the built-in hard disk is indi-
cated.
8
System Software Version (SYSTEM VERSION)
This line displays the version number of the installed
system software.
8
MAC Address (MAC ADDRESS)
A MAC (Media Access Control) address is displayed.
8
IP Address (IP ADDRESS)
The IP address is displayed.
8
Subnet Mask (SUBNET MASK)
The subnet mask is displayed.
8
Gateway (GATEWAY)
The gateway is displayed.