Lincoln Electric POWER WAVE 11124 - Manual (Page 16)

A-6 INSTALLATION
POWER WAVE® AC/DC 1000
A-6
OPTIONAL EQUIPMENT
System
Identifier
Ethernet Network
Equipment
Personal
Computer
Travel Carriage
Travel Carriage
(High Capacity)
Controller
Mounting Bracket
User Interface
Horizontal
Adjuster
Vertical Adjuster
Wire Reel
Mounting (single)
Wire Reel
Mounting (dual)
Mounting for Dual
Head
Flux Hopper
Flux Hopper
Remote Wire
Drive Module
Part No.
Customer
Supplied
Customer
Supplied
K325-x
K325-HCx
K2462-1
K96
K29
K299
K390
K387
K219
K389
K2626-1
Description
Ethernet Switch, Cables, etc. required for arcs > 1000A, or for use of Power Wave
Submerged Arc Utilities software package.
IBM Compatible PC (Windows NT SP6, Windows 2000, Windows XP, or greater)
required for use with Power Wave Submerged Arc Utilities software package.
TC-3 Self-Propelled Travel Carriage for traversing standard carriage
beam (per G1458)
TC-3 Self-Propelled High Capacity Travel Carriage for traversing standard carriage
beam (per G1458)
PF-10A Mounting Bracket mounts PF-10A Controller to left side of TC-3 carriage.
Brackets can be cascaded to accommodate more than one controller.
Note: Bracket uses mounting holes reserved for K299 Wire Reel Assembly
(see Wire Reel Mounting options for additional information).
Horizontal Lift Adjuster provides 2" (51mm) crank adjustment of horizontal head posi-
tion.
Vertical Lift Adjuster provides 4" (102mm) crank adjustment of vertical head position.
Also provides 3.37" (95mm) in-and-out horizontal adjustment with movable stops for
repeatability.
Wire Reel Assembly accommodates one 50-60 lb (22.7-27.2 kg) coil, includes mounting
spindle and braking system. Mounts to left side of TC-3 Std. or High Capacity Travel
Carriage (K325-x).
Cannot be mounted to TC-3 when K2462-1 PF-10A Mounting Bracket is used (use K390
instead).
Electrode Reels and Mountings for mounting up to two 50-60 lb (22.7-27.2 kg) coils,
includes mounting spindle and braking system. Mounts to top of TC-3 High Capacity
Travel Carriage (K325-HCx). Does not interfere with K2462-1 PF-10A Mounting Bracket.
Tandem Arc Framework includes hex style framework and mounting hardware to attach
two PF-10S or PF-10SF heads directly to a high capacity TC-3 carriage, or user supplied
fixture or gantry.
Flux Hopper with electric flux valve for Submerged Arc welding.
Flux Hopper with electric flux valve, for K387 tandem mounting. Mounts directly to hex
crossbar.
For wire drive applications greater than 100ft.