Lanier 5625 - Manual (Page 56)

Copying
44
2
E
Press the [OK] key.
F
Adjust the paper guides to the paper size.
1. Horizontal size
2.
Vertical size
3. Extender
4. Paper guides
Note
❒ Make sure the paper size and direction in the bypass tray is displayed on
the operation panel.
❒ Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or pa-
per misfeed might occur.
❒ With large copy paper (more than A4L, 8 1 /
2
"
×
11"L), swing out the ex-
tender.
G
With the side you wish to copy onto face up, insert the paper into the by-
pass tray until it stops.
H
Set your originals, then press the { Start } key.
Copying onto non-standard size paper with the bypass tray
Preparation
You can register non-standard paper sizes you use often in keys [Custom1] ,
[ Custom2] , and [Custom3] with the user tools.
⇒
P.131 “System settings”.
Note
❒ Be sure to set the paper size or a paper misfeed might occur.
A
Open the baypass tray.