Starting the machine – Lanier 5625 User Manual

Page 26

Basics

Starting the Machine

Press the operation switch to make the On indicator go on.

Note

❒ If the power is not turned on when the operation switch is pressed, check

if the main power switch is on. If off, turn it on.

❒ During the warm-up period (about 7 minutes), you can use the Auto Start

function.

⇒

P.53 “Auto Start”.

When the machine is set for user codes

Enter your user code using the number keys. Then press the {

} key.

Note

❒ To prevent others from making copies with your user code, press the {

Clear

Modes

} key and the {

Clear/Stop

} key simultaneously after copying.

Reference

For more about user codes

⇒

P.136 “General features”.

When the Energy Saver indicator is lit

The machine is in Energy Saver mode.

Press any key.

The machine will return to the ready condition.

Note

❒ The machine will also return to the ready condition when an original is set

in the document feeder, or when the platen cover or the document feeder
is opened.