Lanier 5625 - Manual (Page 148)

Changing the Machine's Settings
136
6
General features
Menu Description
APS Priority As a default setting, the Auto Paper Select is selected just
after the machine is turned on or when modes are
cleared. You can cancel this setting.
Note
❒ Default: On
ADS Priority (FC) By default Manual Image Density is selected in Full Col-
or mode just after the machine is turned on or when
modes are cleared. You can cancel this setting so that the
Auto Image Density is selected.
Note
❒ Default: Off
ADS Prio. (B&W/SC) As a default setting, Auto Image Density is selected in
Black, Single Color, and Twin Color mode just after the
machine is turned on or when modes are cleared. You
can cancel this setting.
Note
❒ Default: On
Orig. Mode Priority You can select the original image type (Auto Text/Photo
mode, Text mode, Photo mode, or Special Original
mode) that is selected automatically just after the ma-
chine is turned on or when modes are cleared.
Note
❒ Default: Auto Text/Photo mode
Orig. Type Priority You can select the special original type (Marker Pen, Ink-
jet, or Map) that is selected automatically just after the
machine is turned on or when modes are cleared.
Note
❒ Default: Marker Pen
Col. Mode Priority You can select the color mode (Auto Color Selection
mode, Full Color mode, or Black mode) that is selected
automatically just after the machine is turned on or when
modes are cleared.
Note
❒ Default: Auto Color Select