Lowrance electronic AirMap 2000C - Manual (Page 81)

75
To preserve a trail from point A to point B, you must "turn off" the trail
by making it inactive before heading to point C or even back to point A.
When a trail is set inactive, AirMap automatically creates and begins
recording a new trail.
Delete a Trail
To erase or delete a trail: Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to
trail name| ENT|
→ to D
ELETE
T
RAIL
| ENT |
← to
Y
ES
| ENT .
Edit a Trail Name
To edit a trail name: press
MENU | MENU |
↓ to
M Y T RAILS
| ENT |
↓ to trail
name| ENT|ENT . Press
↑ or ↓ to change the first character, then press →
to the next character and repeat until the name is correct. Press
EXIT | EXIT | EXIT | EXIT to return to the previous page display.
Transferring GPS Data Files
Between AirMap and a Computer
To copy GPS Data Files from AirMap's memory to an MMC, see the
entry in this section on Save GPS Data Files to an MMC.
To copy GPS Data Files from an MMC into AirMap's memory, see the
entry in this section on Load GPS Data Files From an MMC.
To copy GPS Data Files from an MMC to your computer, see the in-
struction manual that came with your MapCreate 6 mapping software
or your MMC card reader.
Transferring and Loading Custom Maps
From Computer to AirMap
Custom maps work only from the MMC card or SD card. When a card
containing a Custom Map File is loaded into the unit, AirMap auto-
matically loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to an MMC are contained in
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting an MMC into AirMap, see Sec.
2, Installation/Accessories.
Utilities
Utilities are useful tools for traveling or for outdoor activities.
NOTE:
AirMap also includes a set of Aviation-only utilities. These are dis-
cussed in Sec. 3, Aviation Utilities.