Linksys SPA9000 User Manual

Page 93

Appendix B: Configuring the Nighttime Auto-Attendant
Instructions for Setting Up the Nighttime Auto-Attendant

IP Telephony System

b. Replace “dir” with “nt” (see the new text in boldface). Then add this line of code:

This is the AA script 2 code:

c. Copy the AA script 2 code from the Notepad, and paste it in the AA script 2 field.

6. For the DayTime field, enter the daytime hours for the daytime auto-attendant in 24-hour format. The start

and end times should be in this format:

start=hh:mm:ss;end=hh:mm:ss
(hh for hours, mm for minutes, and ss for seconds)

For example, start=9:0:0;end=17:0:0 means the start time is 9 AM and the end time is 5 PM. The other hours
(5 PM to 9 AM) are considered nighttime hours.

7. For the NightTime AA setting, select yes.

8. For the NightTime AA Script setting, select 2.

9. Click the Submit All Changes button to save your new settings.

Congratulations! You have set up the nighttime auto-attendant.

NOTE: If you want to configure the
Weekend/Holiday Auto-Attendant, refer to
“Chapter 6: Using the Web-based Utility” for
instructions.