beautypg.com

Linksys SPA9000 User Manual

Page 57

background image

50

Chapter 6: Using the Web-based Utility
The Voice Tab

IP Telephony System

Ring6 Cadence. This is the cadence script for distinctive ring 6. The default is 60(.2/.4,.2/.4,.2/4).

Ring7 Cadence. This is the cadence script for distinctive ring 7. The default is 60(.4/.2,.4/.2,.4/4).

Ring8 Cadence. This is the cadence script for distinctive ring 8. The default is 60(0.25/9.75).

Distinctive Call Waiting Tone Patterns

CWT1 Cadence. This is the cadence script for distinctive CWT (Call Waiting Tone) 1. The default is 30(.3/9.7).

CWT2 Cadence. This is the cadence script for distinctive CWT2. The default is 30(.1/.1, .1/9.7).

CWT3 Cadence. This is the cadence script for distinctive CWT3. The default is 30(.1/.1, .3/.1, .1/9.3).

CWT4 Cadence. This is the cadence script for distinctive CWT4. The default is 30(.1/.1,.1/.1,.1/9.5).

CWT5 Cadence. This is the cadence script for distinctive CWT5. The default is 30(.3/.1,.1/.1,.3/9.1).

CWT6 Cadence. This is the cadence script for distinctive CWT6. The default is 30(.1/.1,.3/.2,.3/9.1).

CWT7 Cadence. This is the cadence script for distinctive CWT7. The default is 30(.3/.1,.3/.1,.1/9.1).

CWT8 Cadence. This is the cadence script for distinctive CWT8. The default is 2.3(.3/2).

Distinctive Ring/CWT Pattern Names

Ring1 Name. In an INVITE’s Alert-Info header, this is the name that picks distinctive ring/CWT 1 for the inbound
call. The default is Bellcore-r1.

Ring2 Name. In an INVITE’s Alert-Info header, this is the name that picks distinctive ring/CWT 2 for the inbound
call. The default is Bellcore-r2.

Ring3 Name. In an INVITE’s Alert-Info header, this is the name that picks distinctive ring/CWT 3 for the inbound
call. The default is Bellcore-r3.

Ring4 Name. In an INVITE’s Alert-Info header, this is the name that picks distinctive ring/CWT 4 for the inbound
call. The default is Bellcore-r4.

Ring5 Name. In an INVITE’s Alert-Info header, this is the name that picks distinctive ring/CWT 5 for the inbound
call. The default is Bellcore-r5.

Figure 6-28: Voice - Regional Screen - Distinctive Call

Waiting Tone Patterns

Figure 6-29: Voice - Regional Screen - Distinctive

Ring/CWT Pattern Names