Step 2, Step 3, Step 4 – Lifescan Ultra User Manual

Page 57

Note: Replacing the battery does not affect previous test results stored in
memory. However, the time and date settings may need to be updated.
Always confirm the unit of measure is mg/dL.

STEP 2

Remove the Old Battery.
Pull upward on the clear plastic tab. Insert
one 3.0 V (#2032 or equivalent) lithium bat-
tery, making sure the positive “+” side of the
battery is facing up.

STEP 3

Place the Cover.
Place the cover over the battery compartment.
Push down until you hear the tab click into
place.

STEP 4

Check the Time, Date, and Unit of
Measure.
After replacing the battery, turn the meter on by inserting a test strip or
pressing the

button. If the meter is in setting mode, confirm that the

time, time format and date are set correctly. If they are not, use the
and

buttons to reset the meter before testing. See Meter Set-up, pages

40–45. Also, be sure to confirm the unit of measure is mg/dL.

WARNING: The mg/dL unit of measure is the standard in the
United States. If mg/dL does not appear, call LifeScan Customer
Service at 1 800 227-8862.

Blood Glucose Meter

AW 06

AW 060-2

0-213-02

13-02A

T42

T39

RENA TA

SWISS MADE