Step 3 – Lifescan Ultra User Manual

Page 20

STEP 3

Code the Meter.
Immediately press the

button, while the

code number is displayed on meter to select the
correct code. Each time you press and release
the

button, the number will increase by

one. To move more quickly, press and hold the

button.

Note: If the apply blood symbol is displayed
before the meter is coded correctly, remove the
test strip and repeat steps 1 through 3.
Note: If you scrolled past the desired code
number, continue to press the

button until

the correct code number appears.
After selecting the correct code number, it will
flash for three seconds and then appear solid
for three seconds.
CAUTION: Matching the code on the meter
and the code on the test strip vial is essential to
obtain accurate results. Each time you test,
check to make sure the code numbers match.
Then the symbol will appear with mg/dL,
indicating that the OneTouch

Ultra

System is

ready for testing.
WARNING: If mg/dL does not appear with
the symbol, call LifeScan Customer
Service at 1 800 227-8862.

Example

DCO_06405104B_OTU_Uni_OB_US 3/8/06 12:17 PM Page 12