Lifescan Ultra - Manual (Page 45)

37
STEP 3
Transfer Data.
Follow the instructions in the
OneTouch
® Diabetes Management
Software User’s Manual to initiate the data
transfer command.
O will appear on
the meter display when the first com-
mand is received, indicating that the meter is in the communi-
cation mode. If the command is not received within two minutes,
the meter will turn itself off. Pressing the
button will also turn
the meter off.
To learn more about OneTouch ® Diabetes Management Software
or to obtain a OneTouch ® Interface Cable separately, call LifeScan
Data Management Line at 1 800 382-7226 or visit us at
www.LifeScan.com.
Note: While in the communication mode, you will be unable to
perform a blood glucose test. If the meter is in either memory or
setting mode, it will not respond to computer commands.
DCO_06405104B_OTU_Uni_OB_US 3/8/06 12:17 PM Page 37