Lincoln Electric BULLDOG SVM208-A - Manual (Page 66)

SLIP
RINGS
201A(-)
202A(+)
FIGURE F.3 – BRUSH HOLDER LEADS 201(-) AND 202B (+)
FIGURE F.4 – DIODE BRIDGE LEAD ASSIGNMENTS
ROTOR “FLASHING” CIRCUIT TEST (continued)
PROCEDURE
1. With the 3/8” nutdriver, remove the 20 sheet
metal screws that hold the top cover to the con-
trol box. Remove the top cover.
2. Locate and remove lead #201A from the brush
holder. See Figure F.3 for location.
3. Connect the negative (-) lead of the DC amme-
ter to lead #201A and the positive (+) lead to the
brush holder.
4. Remove lead #7 from field diode bridge rectifier
D2. See Figure F.4. Electrically isolate the
lead.
TROUBLESHOOTING AND REPAIR F-18 F-18
BULLDOG® 140
7
201
201
9
200
+
–
200C
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC