Lenovo THINKCENTRE 4485 User Manual
Page 71

Diagnostic Error Code
FRU/Action
080-197-XXX Game Port interface test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 43
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
080-198-XXX Game Port interface test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 43
2. Flash the system and re-test. See “Updating
(flashing) the BIOS from a disc” on page 475
3. Go to “Undetermined problems” on page 71
080-199-XXX Game Port interface test failed, cause
unknown
1. See “Undetermined problems” on page 71
2. Flash the system and re-test. See “Updating
(flashing) the BIOS from a disc” on page 475
3. Replace component under function test
086-000-XXX Mouse Port interface Test Passed
No action
086-001-XXX Mouse Port interface Presence
1. Mouse
2. System board
086-032-XXX Mouse Port interface Device controller
failure
1. Mouse
2. System board
086-035-XXX Mouse Port interface Reset
1. Mouse
2. System board
086-040-XXX Mouse Port interface IRQ failure
1. Run Setup
2. Mouse
3. System board
086-195-XXX Mouse Port interface Test aborted by user
Information only Re-start the test, if necessary
086-196-XXX Mouse Port interface test halt, error
threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
086-197-XXX Mouse Port interface test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 43
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
086-198-XXX Mouse Port interface test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 43
2. Flash the system and re-test. See “Updating
(flashing) the BIOS from a disc” on page 475
3. Go to “Undetermined problems” on page 71
Chapter 7
.
Symptom-to-FRU index
63