Lenovo THINKCENTRE 4485 - Manual (Page 58)

In the following index, X can represent any number.
Diagnostic Error Code FRU/Action
000-000-XXX BIOS Test Passed No action
000-002-XXX BIOS Timeout 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-024-XXX BIOS Addressing test failure 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-025-XXX BIOS Checksum Value error 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-026-XXX FLASH data error 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-027-XXX BIOS Configuration/Setup error 1. Run Setup
2. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475
3. System board
000-034-XXX BIOS Buffer Allocation failure 1. Reboot the system
2. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475
3. Run memory test
4. System board
000-035-XXX BIOS Reset Condition detected 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-036-XXX BIOS Register error 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-038-XXX BIOS Extension failure 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475
2. Adapter card
3. System board
000-039-XXX BIOS DMI data error 1. Flash the system. See “Updating (flashing) the BIOS
from a disc” on page 475.
2. System board
000-195-XXX BIOS Test aborted by user Information only Re-start the test, if necessary
000-196-XXX BIOS test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
50 ThinkCentre Hardware Maintenance Manual